Products
Inline Fluoropolymer Heater CSPH
The CSPH series inline chemical heaters are composed of multiple sets of fluoroplastic heaters connected in, with a single set power of up to 16KW. They can be combined freely according to process requirements, with a combined power range of 96-160kw.
The control part of the CSPH series heaters consists of PLC, touchscreen, solid-state relays, contactors, circuit breakers, etc., allowing adjustable process temperature.
The CSPH series heaters are equipped with various safety protection measures, ensuring safety and reliability
| Wattage: | 96-162kw |
| Voltages: | 380V, 400V, 3~ |
| Inlet/Outlet: | DN32 |
| Wetted surfaces: | PP, PVDF, PTFE, PFA |
| Minimum water flow rate: | 0 lpm (column and pipes need full of liquid) |
| Process temperature outlet: | up to 80℃ |
| Temperature accuracy： | ±1℃, depending upon operating conditions |
| Liquid pressure range: | 0.6-7bar (PRV set to 7bar) |
| Remote interface: | Yes（with RI option） |
| Communication: | RS485（with RC option） |
| Dimension： | 1200 (W) *650 (D) *2450 (H) mm |
| Standard Safety Devices： | EMO Pressure Relief Valve (PRV) Ground Fault Protection (GFP) Electrically grounded heating chamber construction Flow Sensor， Pressure Sensor Safety Limit Control (SLC) Bimetallic heater over temperature sensor(s) Heating column over-temperature protection Solid state relay (SSR) overheat bimetallic sensor Sensor failure detection Control circuit fuse protection |
