Products
Inline Water Bath Heater CSWBH
Using a water bath for indirect heating, the wetted surfaces was fluoroplastic, ensuring that no metal contacts the heated liquid.
According to power requirements, 1-3 stainless steel water tanks are used, with a maximum power of 192kW per unit.
Multiple protective measures with high safety.
| Wattage: | 96-192kw |
| Voltages: | 380V，400V，3~ |
| Inlet/Outlet: | DN32 |
| Wetted surfaces: | PP，PTFE ，PFA |
| Minimum water flow rate: | 0 lpm |
| Process temperature outlet: | up to 80℃ |
| Temperature accuracy： | ±1℃, depending upon operating conditions |
| Liquid pressure range: | 0.6-7bar (PRV set to 7bar) |
| Dimension： | 1700*950*2300 mm |
| Standard Safety Devices： | EMO Pressure Relief Valve (PRV) Ground Fault Protection (GFP) Electrically grounded heating chamber construction Flow Sensor Pressure Sensor Level Sensor Solid state relay (SSR) overheat bimetallic sensor Control circuit fuse protection |
