Products
Inline Titanium Heater CSTH
The CSTH series titanium heater is an inline heater, with the contact part for heating the liquid made of pure titanium and PVDF, to meet high purity requirements.
The power of titanium heater CSTH series ranges from 12kW to 168kW, with different voltage options, and versions with certification standards are available for selection. The CSTH series has CE certification, and some models have ETL cerification that meets UL standards.
The CSTH series of titanium heaters adopts multiple protection measures, ensuring high safety levels.
Within a compact size of 71*43*160 cm, it accommodates a maximum heating power of 144kW.
Compared to traditional stainless steel heaters, it can be used for heating DI water and some acidic and alkaline chemicals.
The CSTH titanium heater can directly replace the Tytan series titanium heater without any modification to the equipment.
| Wattage: | 12-168kw |
| Voltages: | 380V，400V，480V， 3~ |
| Standards: | CE, ETL (Opition, standards UL499) |
| Inlet/Outlet: | 2-inch MNPT |
| Wetted surfaces: | CP2 titanium standard |
| Minimum water flow rate: | 0 lpm (column and pipes need full of liquid |
| Process temperature outlet: | up to 90℃ |
| Temperature accuracy： | ±1℃, depending upon operating conditions |
| Liquid pressure range: | 10-100PSI (PRV set to 100PSI) |
| Remote interface: | Yes（with RI option） |
| Communication: | RS485（ with RC option ） |
| Dimension： | 71 (W)*43 (D)*160 cm (H) (144kw) |
| Standard Safety Devices： | EMO Pressure Relief Valve (PRV) Ground Fault Protection (GFP) Electrically grounded heating chamber construction Safety Limit Control (SLC) Bimetallic heater over temperature sensor(s) Heating column over-temperature protection Solid state relay (SSR) overheat bimetallic sensor Sensor failure detection Control circuit fuse protection， |
